Handle Bar Risers - Alloy 22 MM

Do you feel like your riding position is too low? Our motorcycle handlebar risers are a great cost effective solution without having to replace your handlebars. Suitable for most bikes with 22mm (7/8") diameter handlebars, these will raise your handlebars by 30mm.

Features:

• Raises the original 7/8" (22 mm) diameter tubular handlebar by 30 mm (1.2")
• No need to replace your handlebars for a more upright position
• 4x 8mm x 67mm bolts included
• 35 mm center to center bolt holes

Installation Directions:

Simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and re-fit the top clamp using the longer high tensile steel hardware provided. No change of control cables, wiring, or hoses is required for most motorcycles however, the installer should always check for adequate cable/wiring/hose slack during installation.